JNTU KAKINADA ADMISSION NOTIFICATION - 2011

UNIVERSITY OF HYDERABAD ADMISSION ANNOUNCEMENT 2011-12

DIETCET Entrance Exam New Date

According to the report of Convenor DIETCET 2011 the date for DIETCET entrance exam has been postponed from 2011 April 24 to 2011 May 29.

The examination timings will be from 10:30 am to 12:30 pm.

Candidates are advised to take note of the revised date.

THE A.P. MAHESH CO-OP. URBAN BANK LTD. CLERKS RECRUITMENT

                                            

             THE A.P. MAHESH CO-OPERATIVE URBAN BANK LTD

                             (MULTI-STATE SCHEDULED BANK)        

The A.P.Mahesh Co-operative Urban Bank Ltd., a leading Multi State Scheduled Co-op. Urban Bank in South India, with a business mix of about Rs.1400 crores, with a net work of 34 Branches spread across 3 states (Andhra Pradesh, Maharashtra and Rajasthan),

Invites applications from the candidates fulfilling the following criteria for vacancies in the Clerical cadre of the Bank.

Educational Qualifications	Commerce Graduate from a recognized University with adequate knowledge of computer applications. However, those candidates who are appearing for final examination this year are also eligible to apply.
Age Limit	28 years (eligibility as on 01.03.2011)
Selection Basis	Written Test   &  Interview

How to apply:

Interested candidates fulfilling the above eligibility norms are advised to apply online between 29.03.2011 to 30.04.2011, (both days inclusive) only through “Careers Section” on our Bank’s website www.apmaheshbank.com after carefully going through the guidelines mentioned therein. No other means / mode of application will be accepted. 

RECRUITMENT OF CLERKS - 2011

GUIDELINES

The A.P.Mahesh Co.op. Urban Bank Ltd., a leading Multi-State Scheduled Co.op. Urban Bank in South India is hiring talented and aspiring individuals for the post of Clerks.

Eligible candidates are advised to apply online between 29.03.2011 to 30.04.2011 (inclusive of both days) only through the bank’s website after carefully going through the instructions contained in this advertisement. No other means/ mode of application will be accepted.

1.  Important Dates

Opening date of Online Registration Gateway	29.03.2011
Closing date of Online Registration Gateway	30.04.2011
Date of Written Examination	05.06.2011
Candidates are advised to download call letters for appearing in the written test from the website by entering their registration number and password which will be generated at the time of applying online.

Educational Qualifications	Commerce Graduate from a recognized University with adequate knowledge of computer applications. However, those candidates who are appearing for final examination this year are also eligible to apply.
Age Limit (eligibility as on 01.03.2011)	28 years

     

Guideline please Click Here

CLICK HERE TO APPLY ONLINE

APPSC WRITTEN EXAM SCHEDULE

LP CET - 2011 NOTIFICATION

ESIC STENOGRAPHERS RECRUITMENT

TTD TECHNICAL OFFICERS (CIVIL) RECRUITMENT

On line applications are invited from the eligible and interested candidates for the post of ASSISTANT TECHNICAL OFFICER (CIVIL) in TTD with the following qualifications. The last date for filing of online applications is 30-4-2011. The TTD Management has right to cancel/postpone the notification and selection process if any without any intimation to the candidates on administrative reasons and also subject to receipt of approval from the Government of Andhra Pradesh. The applications available from the date of 15-4-2011 in online.

PERSONS PROFESSING HINDU RELIGION SHOULD ONLY APPLY.

1	Name of the Post	:	Assistant Technical Officer (Civil)
2	Number of posts	:	15 (Fifteen)
3	Reservation Category	:	OC - 05 OC(W) - 03 BC-A - 01 BC-B - 01 BC-D - 01 SC - 02 ST - 01 HH - 01 ------ Total : 15
4	QUALIFICATIONS	:	MUST POSSESS L.C.E. DIPLOMA ISSUED BY THE BOARD OF TECHNICAL EDUCATION OR AN EQUIVALENT QUALIFICATION THERETO.
5	Age	:	Must have completed 18 years of age and must not have completed 34 years as on 01-07-2011 Upper age relaxation is 5 years in respect of B.C., S.C., S.T. and TTD in service Category of candidates and 10 years in respect of Physically challenged category of candidates. 3. In the case of Ex-Servicemen a person who worked in the armed forces of the Indian union, shall be allowed to deduct from his age a period of three (03) years in addition to the length of service rendered by him in the armed forces for purposes of the maximum age limit

TTD SANITARY INSPECTORS RECRUITMENT

Applications are invited from the eligible and interested candidates for the post of SANITARY INSPECTOR in TTD with the following qualifications. The applications should reach the Executive Officer, Tirumala Tirupati Devasthanams, K.T. Road, Tirupati on or before 30-4-2011 with complete Bio-data particulars such as proof of Age Educational Qualifications, Technical Qualifications, Marks Statements, Experience, Proof of Caste certificate etc., duly attested by the Gazetted Officer (Photostat copies to be enclosed) along with recent passport size Photograph.

The cover should be superscribed as “Application for the post of SANITARY INSPECTOR, TTD Management is not responsible for postal delay or any other delays. Incomplete applications and applications received after last date will not be entertained. The TTD Management has right to cancel/postpone the notification and selection process if any without any intimation to the candidates on administrative reasons.

PERSONS PROFESSING HINDU RELIGION SHOULD ONLY APPLY.

1	Name of the Post	:	SANITARY INSPECTOR
2	Number of posts	:	07 (Eight only)
3.	Reservation Category	:	OC - 01 OC(W) - 01 BC-A - 01 BC-B - 01 SC - 01 ST - 01 HH - 01 ------ Total : 07
4	QUALIFICATIONS	:	MUST HAVE PASSED INTERMEDIATE EXAMINATION. ii) MUST POSSESS A CERTIFICATE OF SANITARY INSPECTOR TRAINING ISSUED BY THE MEDICAL AND HEALTH SERVICES OF THE ANDHRA PRADESH GOVERNMENT.
5	Age	:	1. Must have completed 18 years of age and must not have completed 34 years as on 01-07-2011 Upper age relaxation is 5 years in respect of B.C., S.C. & S.T. and TTD inservice candidates of Category and 10 years in respect of Physically challenged category of candidates. 3. In the case of Ex-Servicemen a person who worked in the armed forces of the Indian union, shall be allowed to deduct from his age a period of three (03) years in addition to the length of service rendered by him in the armed forces for purposes of the maximum age limit

KAKATIYA UNIVERSITY ADMISSION NOTIFICATION

S.V. MEDICAL COLLEGE TIRUPATI RECRUITMENT

CENTRAL TEACHER ELIGIBILITY TEST (CTET) - 2011 NOTIFICATION

 

FOR TEACHERS ELIGIBILITY TEST (TET) PAPER-I MODEL PAPER CLICK HERE

CENTRAL TEACHER ELIGIBILITY TEST (CTET) - 2011

SCHEDULE OF CTET EXAMINATION

DATE OF EXAMINATION	PAPER	TIMING	DURATION
26.06.2011	I	09.30 TO 11.00 HOURS	1.30 HOURS
26.06.2011	II	12.30 TO 14.00 HOURS	1.30 HOURS

Structure and Content of CTET

 All questions in CTET test will be Multiple Choice Questions (MCQs), each carrying one mark, with four alternatives out of which one answer will be correct. There will be no negative marking.

There will be two papers of CTET.
(i)Paper I will be for a person who intents to be a teacher for classes I to V.
(ii)Paper II will be for a person who intents to be a teacher for classes VI to VIII.

Note: A person who intents to be a teacher for both levels (classes I to V and classes VI to VIII) will have to appear in both the papers (Paper I and Paper II).

Paper I (for classes I to V): Duration of examination - one-and-a-half hours

Structure and Content (All Compulsory): (Appendix 1)

(i) Child Development and Pedagogy    30 MCQs      30 Marks
(ii) Language I                                    30 MCQs      30 Marks
(iii) Language II                                  30 MCQs      30 Marks
(iv) Mathematics                                 30 MCQs      30 Marks
(v) Environmental Studies                    30 MCQs      30 Marks
      Total                                           150 MCQs    150 Marks

Nature and standard of questions:

The test items on Child Development and Pedagogy will focus on educational psychology of teaching and learning relevant to the age group of 6-11 years. They will focus on understanding the characteristics and needs of diverse learners, interaction with learners and the attributes and qualities of a good facilitator of learning.

The Test items for Language I will focus on the proficiencies related to the medium of instruction, (as chosen from list of prescribed language options in the application form).

The Language II will be from among the prescribed options other than Language I. A candidate may choose any one language from the available language options and will be required to specify the same in the application form. The test items in language II will also focus on the elements of language, communication and comprehension abilities.

The test items in Mathematics and Environmental Studies will focus on the concepts, problem solving abilities and pedagogical understanding of the subjects. In all these subject areas, the test items will be evenly distributed over different divisions of the syllabus of that subject prescribed for classes� I–V, by the NCERT/CBSE.

The questions in the tests for Paper I will be based on the topics prescribed for classes� I–V, but their difficulty standard, as well as linkages, could be up to the secondary stage.

Paper II (for classes VI to VIII): Duration of examination - one-and-a-half hours

Structure and Content: (Appendix 1)

(i) Child Development & Pedagogy (compulsory)                                            30 MCQs       30Marks
(ii) Language I (compulsory)                                                                            30 MCQs       30Marks
(iii) Language II (compulsory)                                                                          30 MCQs       30Marks
(iv)(a) For Mathematics and Science teacher: Mathematics and Science           60 MCQs       60Marks
     (b) For Social Studies/Social Science Teacher: Social Science                     60 MCQs       60Marks
     (c) For any other teacher � either (a) or (b)

Nature and standard of questions:

The test items on Child Development and Pedagogy will focus on educational psychology of teaching and learning, relevant to the age group 11-14 years. They will focus on understanding the characteristics, needs and psychology of diverse learners, interaction with learners and the attributes and qualities of a good facilitator of learning.

The test items for Language I will focus on the proficiency related to the medium of instruction, as chosen from list of prescribed options in the application form.

The Language II will be a language other than Language I. A candidate may choose any one language from among the available options and as in the specified list in the application form and attempt questions in the one indicated by the candidate in the application form by him. The Test items in Language II will also focus on the elements of language, communication and comprehension abilities.

The test items in Mathematics and Science, and Social Studies/Social Science will focus on the concepts, problem solving abilities and pedagogical understanding of these subjects. The test items of Mathematics and Science will be of 30 marks each. The test items will be evenly distributed over different divisions of the syllabus of that subject as prescribed for classes VI-VIII by the NCERT/CBSE.

The questions in the tests for Paper II will be based on the topics of the prescribed syllabus of the NCERT/CBSE for classes VI-VIII but their difficulty standard as well as linkages could be up to the senior secondary stage.

DETAILED STRUCTURE AND CONTENT

A. PROCEDURE TO BE FOLLOWED DURING CONDUCT OF CTET

1). The examination rooms/hall will be opened 30 minutes before the commencement of the test. Candidates should take their seat immediately after opening of the examination all. If the candidates do not report in time, they are likely to miss some of the general instructions to be announced in the Examination Hall. 2). The candidate must show, on demand, the Admit Card for admission in the examination room/hall. A candidate who does not possess the Admit Card issued by the Board shall not be permitted for the examination under any circumstances by the Centre Superintendent. 3). A seat indicating roll number will be allocated to each candidate. Candidates should find and occupy their allotted seat only. Any candidate found to have changed room or the seat on his/her own other than allotted, his/her candidature shall be cancelled and no plea would be accepted for it. 4). A candidate who comes after the commencement of the examination shall not be permitted to sit in the examination. 5). Candidates are not allowed to carry any textual material, Calculators, Docu Pen, Slide Rules, Log Tables, and Electronic Watches with facilities of calculator, printed or written material, bits of papers, mobile phone, pager or any other device, except the Admit Card and Blue/ Black Ball Point pen inside the Examination Room/Hall. If any candidate is in possession of any of the above item, his/her candidature will be treated as unfairmeans and cancel the current examination & also debarred the candidate for future examination(s) & the material will be seized. 6). No candidate, without the special permission of the Centre Superintendent or the Invigilator concerned, will leave his/her seat or Examination Room until the full duration of the paper is over. Candidates should not leave the room/hall without handing over their Answer Sheets to the Invigilator on duty. 7). Candidates are advised to bring with them a cardboard or a clip board on which nothing should be written, so that they have no difficulty in writing responses in the Answer Sheet even if the tables provided in the examination room/hall do not have smooth surface. They should also bring their own Ball Point Pens (Black/Blue) of good quality. These will not be supplied by the Board. 8). Smoking in the Examination Hall/Room is strictly prohibited. 9). Tea, coffee, cold drinks or snacks are not allowed to be taken into the examination rooms during examination hours. 10). Ten minutes before the commencement of the paper, each candidate will be given sealed Test Booklet with an Answer Sheet placed inside it. 11). Immediately on receipt of the Test Booklet the candidates will fill in the required particulars on the cover page of the Test Booklet with Ball Point Pen only. He/She will not open the Test Booklet until asked to do so by the Invigilator. Do not open/break the seal before the announcement.

IMPORTANT INSTRUCTIONS PRIOR TO EXAMINATION

12). Five minutes before the commencement of the paper the candidate will be asked to break/open the seal of the Test Booklet. He/She will take out the Answer Sheet carefully. The candidate should check carefully that the Test Booklet Code printed on Side-2 of the Answer Sheet is the same as printed on the Test Booklet. In case of discrepancy, the candidate should immediately report the matter to the Invigilator for replacement of both the Test Booklet and the Answer Sheet. 13). Candidate will then write particulars with Blue/Black ball point pen only on both the sides of the Answer Sheet. Use of pencil is strictly prohibited. If anybody uses the pencil, his/her answer sheet will be rejected and no correspondence will be entertained in this regard. After completing this step, the candidates will wait for the signal by the invigilator. 14). The test will start exactly at the time mentioned in the Admit Card and an announcement to this effect will be made by the invigilator. 15). During the examination time, the invigilator will check Admit Card of the candidate to satisfy himself/herself about the identity of each candidate. The invigilator will also put his/her signatures in the place provided in the Answer Sheet on Side-1. 16). UNFAIR MEANS :
Candidates shall maintain perfect silence and attend to their Question Paper only. Any conversation or gesticulation or disturbance in the Examination Room/Hall shall be deemed as misbehavior. If a candidate is found using unfair means or impersonating, his/her candidature shall be cancelled and he/she will be liable to be debarred for taking examination either permanently or for a specified period according to the nature of offence.
    If any candidate is in possession of any item(s) as mentioned in Para 5 above, his/her candidature for current examination will be cancelled and also liable to be debarred for future examination(s). 17). After completing the paper and before handing over the Answer Sheet, the candidate should check again that all the particulars required in the Answer Sheet have been correctly written. 18). A signal will be given at the beginning of the examination and at half-time. A signal will also be given before the closing time when the candidate must stop marking the responses. 19). The candidate will check that the Test-booklet contains as many number of pages as are written on the top of the first page of the Test Booklet. The candidate shall not remove any page(s) from the Test-Booklet and if he/she is found to have removed any page(s) from his/her Test Booklet, he/she will be presumed to have used unfair means and shall be liable for criminal action. 20). The candidates must sign twice on the Attendance Sheet at the appropriate place. Firstly, immediately after commencement of the Examination and for the second time while handing over the Answer Sheet to the Invigilator. The candidates are also required to put their left hand thumb impression in the space provided in the Attendance Sheet.

B. Instructions for use of Test Booklet and Answer Sheet

1). The candidates will find the Answer Sheet placed inside the sealed Test Booklet. The seal will be broken/ opened by the candidates on the announcement by the invigilator and the Answer Sheet shall be taken out. Do not open/break the seal before the announcement. 2). Side-2 of each Answer Sheet will have a pre-printed Test Booklet Code like A, B, C or D. The candidates are required to check that the Test Booklet Code pre-printed on Side-2 of the Answer Sheet is the same as printed on the Test Booklet. 3). The Answer Sheet used will be of special type which will be scanned on Optical Scanner. There will be two sides of the Answer Sheet.
    

Side 1	This side of the Answer Sheet contains the following columns which are to be filled in neatly and accurately by the candidate with Blue/Black ball point pen only. Use of pencil is strictly prohibited. i) Roll Number ii) Name of the candidate iii)Father's Name iv) Centre Number v) Name of the Examination Centre vi) Signature of the candidate
Side 2	This side of the Answer Sheet contains the following columns which are also to be filled in by the candidate with Blue/Black Ball Point Pen only. Use of pencil is strictly prohibited. i) Roll Number ii) Centre Number iii) Test Booklet Number

WRITING OF PARTICULARS AND RESPONSES ON SIDE – 2 WITH BLUE/BLACK BALL POINT PEN ONLY WILL BE FILLED UP AS FOLLOWS.

IMPORTANT INSTRUCTIONS FOR MARKING THE RESPONSES

i). Out of four alternatives for each question, only one circle for the correct answer is to be darkened completely with blue/black Ball Point Pen. For example Question No. 008 in the Test Booklet reads as follows:
Qutub Minar is situated in
    (1) Delhi
    (2) Mumbai
    (3) Agra
    (4) Bangalore
    The correct response to this question is (1) Delhi. The candidate will locate Question No. 008 in the Answer Sheet and darken the circle (1) as shown below:
   
ii). Use Blue or Black Ball Point Pen to completely darken the appropriate circle, i.e. one circle for each entry. iii). The answer once marked is not liable to be changed. Use of pencil is strictly prohibited. If any candidate use the pencil for darkening the answer sheet, his/her answer sheet will be rejected. iv). A light or faintly darkened circle is a wrong method of marking and liable to be rejected by the Optical Scanner. v). If the candidate does not want to attempt any question he/she should not darken the circle given against that question. vi). Please do not fold the Answer Sheet and do not make any stray marks on it. 4). ROUGH WORK
The candidate will not do any rough work on the Answer Sheet. All rough work is to be done in the Test Booklet itself. 5). CHANGING AN ANSWER IS NOT ALLOWED
The candidates must fully satisfy themselves about the accuracy of the answer before darkening the appropriate circle as no change in answer once marked is allowed. Use of eraser or white/correction fluid on the Answer Sheet is not permissible as the Answer Sheets are machine gradable and it may lead to wrong evaluation. 6). Prior to handing over the Answer Sheet soon after the examination is over, the candidate must sign the attendance sheet as a proof thereof. The examinee is permitted to carry the Text Booklet.

 IMPORTANT INFORMATION AT A GLANCE FOR CTET 2011

1	a. Sale of CTET Information Bulletin with Application Form at Designated branches of Syndicate Bank,Institutions against Cash Payment only		15.04.2011 to 10.05.2011
	b. Online submission of application and Fee through credit/ debit card on website www.cbse.nic.in		08.04.2011 to 10.05.2011
	c. Receipt of request for Information Bulletin and Application Form by Post at CTET Unit, CBSE, Shiksha Sadan, 17, Rouse Avenue, New Delhi-110002.		15.04.2011 to 30.04.2011
2	Issue of Admit Card		11.06.2011 to 17.06.2011
3	Issue of duplicate Admit Card		20.06.2011
4	Date of Examination	26th June, 2011	Paper-I 0930-1100 hrs* Paper-II 1230-1400 hrs*
5	Centre of Examination	As indicated on the Admit Card
6	Declaration of Results	By 26th July, 2011
7	Dispatch of CTET Certificates/Mark Sheet	By 26th August, 2011
8	Materials to be brought on the day of examination	Admit Card and Blue/ Black Ball Point Pen of good quality.
9	Rough work	All rough work is to be done in the Test Booklet only. The candidate should NOT do any rough work or put tray mark on the Answer Sheet.

*TIME SCHEDULE

	Paper I	Paper II
DATE OF EXAMINATION	26.06.2011	26.06.2011
a) Entry in the Examination Hall	09.00 hrs.	12.00 hrs.
b) Distribution of Test Booklet	09.20 hrs.	12.20 hrs.
c) Seal of the Test Booklet to be broken/opened to take out the Answer Sheet	09.25 hrs.	12.25 hrs.
d) Last entry in the Examination Hall	09.30 hrs.	12.30 hrs.
e) Test commences	09.30 hrs.	12.30 hrs.
f) Test concludes	11.00 hrs.	14.00 hrs.

Examination Fees/Cost of Information Bulletin.

The cost of Information Bulletin inclusive of examination for Teachers Eligibility Test :

General/OBC Category	Rs 500/- (Five hundred)
SC/ST/ Differently Abled Category	Rs 250/- (Two hundred fifty)

Information Bulletin containing Application Form can be obtained by post from the Designated Branches of Syndicate Bank/other Banks/Designated Institutions (List of Syndicate Bank Branches ) or can also be obtained from the Assistant Secretary (CTET), Central Board of Secondary Education, Shiksha Sadan, 17, Institutional Area, Rouse Avenue, Delhi-110002. The Syndicate Bank/other Banks, the designated institutions will not send the Information Bulletin by Post. Hence, no request should be made to them for sending the Bulletin by Post.

The designated branches of Syndicate Banks/Other Banks/designated Institutions are not responsible for any consequences, that may arise due to non-availability of forms in case the copies of application forms are sold out before the last date. In case of such an eventuality the candidate may apply on-line.

Instructions for completing and sending the Application Form by post are given here. Candidates are advised to go through the instructions carefully before filling up the application form.
i). Request for change/correction in any particulars in the Application Form shall not be entertained under any circumstances. The Board will not be responsible for any consequences arising out of non-acceptance of any correction/addition/deletion in any particular once filled in the application form whatsoever the reasons may be.
ii). Incomplete Application Forms, or the forms having over-writing, will be summarily rejected.

Fee once remitted shall not be refunded under any circumstances.

ADMIT CARD

The Admit Card will be sent by post "Under Certificate of Posting(UCP)" to the candidate by 17.06.2011, however, the Board will not be responsible for any consequences that may arise due to loss of admit card in transit. It will be the responsibility of the candidate to contact to the Board in case he/she is not in receipt of the Admit Cards by 20.06.2011.
In case the Admit Card is not received by 20.06.2011, the candidate should contact the Assistant Secretary (CTET), Central Board of Secondary Education, Shiksha Sadan, 17, Institutional Area, Rouse Avenue, Delhi-110002 between 10.00 AM to 5.00 PM giving details of the Post Office, date of dispatch, original receipt of postal dispatch, Photostat copy of the Application Form/Confirmation Page, one photograph (as pasted on the Application Form). Request for issue of admit card after the examination will not be entertained. In no case the duplicate Admit Card would be issued at the Examination Centres.

IMPORTANT NOTES:

1. Candidates can apply for CTET 2011 either on the prescribed Application Form or make application 'ON-LINE'
2. (a) For submission of application on prescribed Application Form :
   • Information Bulletin containing Application Form can be had personally from the Designated Branches of Syndicate Bank, Institutions specified in Appendix-IV against cash payment (Not by post).
   • Information Bulletin containing Application Form can also be had by post by sending Demand Draft of required fee from the Central Board of Secondary Education, Shiksha Sadan, 17 Rouse Avenue, New Delhi-110002.
   • Candidates must follow instructions strictly as given in the Information Bulletin. Candidates not complying with the instructions, their candidature shall be summarily disqualified.
     (b)For ON-LINE submission of application at Board's website www.cbse.nic.in
     Application can also be made 'ON-LINE' by accessing the Boarda's website www.cbse.nic.in.The candidate should supply all details while filling up the Online Form. Candidates are required to take a print out of the computer generated Confirmation page after successful submission of data. Candidates should pay the following fee:
     • General/ OBC Category                                  Rs 500/- (Five hundred)
     • SC/ST/ Differently Abled Category                Rs 250/- (Two hundred fifty)
     The fee can be remitted in the following ways:
     • By Demand Draft in favour of the Secretary, Central Board of Secondary Education, Delhi drawn in any Nationalized Bank payable at Delhi. Write your name, address and registration number on the back of the Demand Draft.
3. Please ensure before mailing the Application Form/ Confirmation Page that:-
   • the candidate has signed the Form at specified place;
   • the candidate has put left hand thumb impression at the specified place;
   • the candidate has pasted the recent passport size photograph in the space earmarked for it;
   • the candidate has written name and complete mailing address in CAPITAL letters including PIN
   CODE
   • the candidate has attached Demand Draft of required fee those who have submitted the application 'ON-LINE';
   • the candidate has kept a photocopy of the Application Form/ Confirmation Page for use as reference for future correspondence.
4. The Application Form/ Confirmation Page complete in all respect should be sent by Registered/Speed Post so as to reach positively by 15.05.2011 in the CBSE office.                                                                                                                                                                                     Note : 7 days grace time i.e. up to 22.05.2011 for receipt of Application Form will be allowed to the candidates belonging to remote areas viz. Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim, Tripura, Lahaul and Spiti District and Pangi sub division of Chamba District of Himachal Pradesh, Andaman & Nicobar Island and Lakshadweep.                                                                                                                                               The Application Form is to be dispatched in the enclosed CBSE envelope only. Those applying -On-line', Confirmation Page must be dispatched in an envelope of size 12"x10" only and superscribing "APPLICATION FOR CTET-2011".
   
   The Application Form sent by courier shall not be accepted and rather rejected. The Application Form will not be received personally in any case.
   
5. Information regarding receipt of applications in the CTET Unit of the CBSE will be put on the Board's website www.cbse.nic.in. The candidates can check the receipt of their Application on the website after 10.06.2011 Candidates whose particulars do not appear on the website may write to the Assistant Secretary, CTET Unit, and forward a photocopy of the Application Form/ Confirmation Page, mode of payment of fee those have submitted application 'ON-LINE' and one passport size photograph (as pasted on the Application Form).
6. In case the Admit Card is not received by 20.06.2011, the candidates should contact the CBSE between 10.00 AM to 5.00 PM giving details of the Post Office, date of dispatch, original receipt of postal dispatch, Photostat copy of the Application Form/ Confirmation Page, one photograph (as pasted on the Application Form)
7. Request for issue of duplicate Admit Card will not be entertained after the examination in any case.
8. For latest updates, please check at Board's website www.cbse.nic.in

Address for obtaining/sending complete Application Form/ Confirmation Page and clarification, if any:-

THE ASSISTANT SECRETARY (CTET),
CENTRAL BOARD OF SECONDARY EDUCATION,
"SHIKSHA SADAN", 17, ROUSE AVENUE,
NEW DELHI-110002
CONTACT NO. 011-23238361 (TELEFAX), 23220153, 23217128 (FAX)

The candidate must retain a photocopy of his/her filled in Application Form for future correspondence, if required.

A.P. TRANSCO ASSISTANT ENGINEERS SYLLABUS

A.P. TRANSCO A.E. (ELECTRICAL) SYLLBUS

Electric Circuits:
Network graph, KCL, KVL, node and mesh analysis, star/ delta transformation; electromagnetic induction; mutual induction; ac fundamentals; harmonics, transient response of dc and ac networks; sinusoidal steady-state analysis, resonance, ideal current and voltage sources, Thevenin’s, Norton’s, Superposition and Maximum Power Transfer theorems, two-port networks, three phase circuits, power measurement .
Electrical Machines:
Single phase transformer – equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers – connections, parallel operation; auto-transformer; DC machines – types, windings, generator/ motor characteristics, armature reaction and commutation, starting and speed control of motors; three phase induction motors – principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines – performance, regulation and parallel operation of generators, motor starting, characteristics and applications .
Power Systems:
Basic power generation concepts; transmission line models and performance; underground cable, string insulators; corona; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control; power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; protection of alternator, transformer, transmission lines neutral earthing, solid state relays and digital protection; circuit breakers; system stability concepts, swing curves and equal area criterion
Utilization & Control Systems:
Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Nyquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; Heating – resistance, induction, dielectric; Welding – spot, seam and butt; Electric traction – speed-time curves, tractive effort;
Measurements:
Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy and power factor; digital voltmeters and multi-meters; phase, time and frequency measurement; Q-meters; oscilloscopes;
Analog and Digital Electronics:
Characteristics of diodes, BJT, FET; amplifiers -biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; Combinational and sequential logic circuits; multiplexer; Schmitt trigger; A/D and D/A converters; 8-bit microprocessor basics, architecture, programming and interfacing.
Power Electronics and Drives:
Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs – static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters – fully controlled and half controlled; principles of choppers and inverters; basic concepts of adjustable speed dc and ac drives.

A.P. TRANSCO A.E. (TELECOM) SYLLBUS

 
Network Analysis:
Kirchoff’s Laws, RC, RL & RLC Circuits, Initial conditions, Energy, Power, Instantaneous, max, average, RMS values of alternating currents, Phaser representation, transient and steady state analysis, Total response. Network analysis using Laplace Transforms, properties of Laplace transforms.
Fourier Series:
Continuous and discrete Fourier Transforms, z-transforms. Applications to signal Analysis. Convolution. Network Theorems and Applications. Two Port Parameters, Series, Parallel and Cascade connections of two port networks, Z, Y, ABCD Parameters, Network Functions, Poles and Zeros. Driving point and Transfer Functions, Image Parameters, Conventional LP, HP, BP, Band Stop Filters. Composite Filters, T, ╥ & Lattice Networks, Attenuators and Equalizers.
Electronic Devices & Circuits:
PN Junction, PNP, NPN Transistors. Biasing, Tunnel Diode, FET, UJT,SCR Characteristics, Various CB,CE,CC transistor Amplifiers – Analysis & Performance. RC coupled and push pull amplifiers, compensation techniques, Feedback, Negative feedback, oscillatorCircuits, Phase Shift Oscillator.
Digital Circuits:
Wave Shaping, multivibrators, Sweep Generators, Counters, logic Gates and Circuits, Number Systems, Codes, Error Detection and Correction. Sequential Circuits, Integrated Circuits OP Amps-Applications, IC Comparator Circuits, A/D, D/A Converters.
Linear Control System:
Open loop, Closed loop system, Signal Flow Graphs, Stability, Routh – Hurwitz and Nyquist Criterion, Bode plots, Gain-phase Margin, Lead-Lag compensation Techniques.
Transmission Lines & Antennas:
Transmission line equation, Primary and Secondary Parameters, Propagation constants, Open and Short Circuited Lines, Standing Waves, Reflection Coefficient, VSWR, Line as Circuit element, Impedance Matching.
Maxwell’s equations and Field Theory:
Various Laws & Theorems in Electromagnetism, Plane Waves, Boundary Conditions, Concept of Radiation, Half wave Dipole, Antenna Arrays, Communication Antennas – performance Characteristics.
Wave guides and Components:
Reciprocal & non Reciprocal Wave guide components, Couplers, Tees, Microwave Sources, Microwave Communication, Link Design.
Basics of Micro Processors & Micro Controllers:
Architecture and Assemblers, memory Devices.
Communication systems:
Modulation, All types of Modulation techniques, SNR, Analog & Digital Communication techniques, multiplexes, Demodulators, Radio Receivers & Transmitters – Characteristics & Basics of Fibre Optics Communication and Satellite Communication Systems.

A.P. TRANSCO A.E. (CIVIL) SYLLBUS


Strength of Materials:
Simple stresses and strains. Hooke’s law. Stress-strain curve for mild steel, elastic constants, compound bars, temperature stresses, strain energy, resilience, impact loading, SFD and BMD for simple cantilever and overhanging beams.
Centre of gravity and moment of inertia, bending and shear stress distributions. Theory of pure torsion, helical spring, thin and thick cylinders, analysis of trusses by method of joints and method of sections, combined direct and bending stresses, column and struts, deflection of beams-double integration, moment area and conjugate beam methods.
Reinforced Concrete:
Basic reinforcing materials, tests on cement and aggregates.
Structural concrete and its grades, workability tests and concrete mix design. Singly and doubly reinforced beams, working stress design of rectangular and flanged beams shear bond, development length and torsion in beams, one-way and two-way slabs, axially and eccentrically loaded columns, isolated and combined footings. Basic concepts of limit state design and its applications to the design of beams, slabs and columns.
Steel Structures:
Grades of steels, design of simple and compound beams, riveted and welded joints, riveted and welded connections’-eccentric framed and seated, simple and compound columns, slab and gusseted bases, grillage foundations, roof trusses, plastic analysis – plastic bending of beams, shape factor, plastic analysis theorems, and analysis of fixed, propped cantilever beams by static and kinematic methods.
Fluid Mechanics & Machinery:
Fluid properties, pressure measurements, manometers, forces on plane and curved surfaces, center of pressure, principle of buoyancy, stability of floating and submerged bodies, metacentre, Kinematics of fluid flow, equation of continuity. Euler’s and Bernoulli’s equations, Impulse-momentum, flow measuring device s – orifices and mouth pieces, notches and weirs, flow through pipes, open channel flow, impact of jets – stationery and moving vanes (flat and curved), radial vanes, hydraulic turbines, pumps and machinery.
Soil Mechanics:
Physical properties of soils, classification and identification, permeability, capillarity, seepage, compaction, shear strength, Earth pressure, slope stability.
Foundation Engineering:
Stress distribution in soils, bearing capacity, settlement analysis, pile foundation, Coffer dams, Caissons, Dewatering, Bracing for excavations, site investigations, New mark charts, Machine foundation.

AP TRANSCO A.E. ELECTRICAL ENGG. 2008 PREVIOUS PAPER

 
Electrical Engineering (A.E-2008)
(Memory based Question paper)


Q. The ratio of voltage and electric current in a closed circuit
a) remains constant
b) varies
c) increases
d) falls

Ans: remains constant

Q. The resistance of a wire varies inversely as
a) area of cross section
b) length
c) resistivity
d) temperature

Ans: area of cross section

Q. The electrical conductivity of metals is typically of the order of ( in ohm-1 m-1)
a) 10 to the power of 7
b) 10 to the power of 5
c) 10 to the power of -4
d) 10 to the power of -6

Ans: 10 to the power of 5*

Q. Four resistors, each of resistance R ohms are available. The minimum resistance of the combination will be
a) 4R
b) R
c) R/4
d) R/8

Ans: R/4

Q. The elements which are not capable of delivering energy by its own are known as
a) unilateral elements
b) non-linear elements
c) passive elements
d) active elements

Ans: passive elements

Q. The magnetic susceptibility of paramagnetic material is
a) less than zero
b) less than one but positive
c) greater than one
d) equal to zero

Ans:

Q. The Direction of current in an ac circuit
a) is from positive to negative
b) is always in one direction
c) varies from instant to instant
d) Cannot be determined

Ans: varies from instant to instan

Q. which of the following statements associated with purely resistive circuits is correct?
a) PF is unity
b) Power consumed is zero
c) Heat produced is zero
d) PF is zero

Ans: PF is unity

Q. The magnetic field energy in an inductor changes from maximum value to minimum value in in 5m sec when connected to an ac source. The frequency of the source is
a) 20 Hz
b) 50 Hz
c) 200 Hz
d) 500 Hz

Ans: 50 Hz

Q. Electronic control systems have the serious draw-backs of
a) low reliability
b) operational difficulty
c) temperature sensitiveness
d) all of above

Ans: temperature sensitiveness*

Q. The system whose characteristic equation has the following roots is marginally stable
a) -j, j, -1,1
b) -3,-2,0
c) -2+3j, -2-3j, -2
d) -3,-2,-1

Ans:

Q. A phase log compensation will
a) improve relative stability
b) increase the speed of response
c) increase band-width
d) increase overshoot

Ans: improve relative stability*

Q. For Nyquist plot we use

a) open loop function
b) closed loop function
c) characteristic equation
d) any of the above

Ans: any of the above

Q. A system with gain margin close to unity or a phase margin close to zero is

a) highly stable
b) oscillatory
c) relatively stable
d) none of these

Ans: oscillatory

Q. Root locus diagram exhibits the

a) frequency response of a system
b) poles of the transfer function for a set of parameter values
c) bandwidth of system
d) all of the above

Ans: poles of the transfer function for a set of parameter values

Q. Increase in the gain K makes the system

a) more stable
b) unstable
c) marginally stable
d) none of above

Ans: unstable

Q. The transfer function of a system is used to determine

a) the output for a given input
b) the type of system
c) the input for a given output
d) the steady state gain

Ans:

Q. In a servo system the voltage induced in the control transformer rotor is the

a) error voltage
b) driving voltage
c) opposing voltage
d) none of these

Ans: error voltage

Q. With the feedback system, the transient response

a) decays slowly
b) decays rapidly
c) rises slowly
d) rises quickly

Ans: decays rapidly


Q. Which of the following types of instrument is an integrating instrument?

a) power factor meter
b) energy meter
c) watt meter
d) frequent meter

Ans: energy meter

Q. Which material is used for make the ’swamping’ resistance that is connected in series with the working coil of a voltmeter?

a) Constanta
b) Manganin
c) Eureka
d) Nichrome

Ans: Manganin


Q. What are used to increase the range of ammeters.

a) Multipliers
b) Shunts
c) Control Springs
d) Potential transformers

Ans: Shunts

Q. Which voltmeter do you select for measuring 50KV DC?

a) Moving Coil Voltmeter
b) Hot wire voltmeter
c) Electro Dynamo meter
d) Electrostatic Voltmeter

Ans: Hot wire voltmeter*

Q. Which of the following you will prefer to extend the range of an ac voltmeter?

a) Low series resistance
b) high resistance in parallel
c) CT
d) PT

Ans: PT

Q. High AC voltages are usually measured with

a) magnetic voltmeter
b) inductive voltmeter
c) potential transformers with voltmeters
d) current transformers and voltmeters

Ans: potential transformers with voltmeters

Q. Creeping is the phenomena occurs in

a) voltmeter
b) watt meter
c) energy meter
d) ammeter

Ans: energy meter

Q. If the Supply voltage is increased by n times, the cross section of feeder will decrease by ________ times ?
a) n
b) 1/n
c) n sqr
d) 1/n sqr

Ans: n

Q. The Frequency is measured by _________ bridge ?
a) Wheatstone bridge
b) hays bridge
c) Owens bridge
d) weins bridge

Ans: wiens bridge

Q. The Source internal Resistance Rs , When equal to Load resistance RL, the maximum transferred is of _____ % of input power?
a) 100
b) 75
c) 50
d) 40

Ans: 50

Note: If Answer contains * means Answer is may be correct but not sure,